Questions tagged [geth-clique]
The geth-clique tag has no usage guidance.
58 questions
0
votes
0
answers
20
views
Private POA geth network fails to start after a sudden shutdown of all nodes
I have a private POA Geth network consisting of three nodes. Due to power issue, all the nodes shut down simultaneously.
After the restart of nodes I am getting this error on all three nodes when i ...
- 141
0
votes
0
answers
96
views
Eth private blochhain dont sync
I initiated a single node for dev testing but it wont work
I used geth 1.14
Genesis file :
{
"config": {
"chainId": 1441,
"homesteadBlock": 0,
"...
0
votes
1
answer
44
views
Go-Ethereum/core-geth: Consensus engine interface, on changing coinbase via Prepare method
I assumed the coinbase could be altered from Prepare, so that transaction fees could be paid out to a custom coinbase. But, it seems like worker.go simply ignores the header.Coinbase after calling ...
- 211
0
votes
0
answers
26
views
IPC Endpoint closes immediately after it opens GETH
I am attempting to establish communication between a bootstrap and member node on the same device using GETH on Windows. Initialising both nodes with my genesis.json file works fine.
geth --datadir ...
- 1
1
vote
1
answer
72
views
How to setup a private GoEthereum network
I'm studying Ethreum by creating by own private ethereum network. I have three basic question. I will give as much information as I can to help to get great responses.
My network setup is very simple:
...
- 11
0
votes
0
answers
122
views
Is it possible to establish a local network between specific Ethereum accounts within the same operational system using Geth?
I tried to launch a local network using Geth. I mean a network of just one running system that hosts some Ethereum accounts. I did that by the below config file and the below command to run Geth node. ...
- 567
0
votes
0
answers
30
views
Server returned HTTP status 404 Not Found
I am running a local ethereum PoA(clique) network in my windows computer using geth with 2 nodes. I am very new to this.
I am trying to get the performance data of the chain using prometheus.
I used ...
0
votes
1
answer
34
views
Creating permissioned networks with geth only
This is a question about permissioning in private network, but actually articulated in 2 subquestions.
Q1) Is it possibile to setup geth for a private ethereum PoA network with whitelist of nodes ...
- 906
0
votes
0
answers
13
views
Geth Blockchain synchronised issue
i am developing my private Blockchain using geth. I am created successfully my private Blockchain and created native coin on that, after that I created RPC URL for metamask later I am transfer some ...
0
votes
1
answer
25
views
Can not deploy a contract in a private clique " Not enough gas left for transaction"
I have installed geth version 1.13.8.
Genesis block:
{
"config": {
"chainId": 212121,
"homesteadBlock": 0,
"eip150Block": 0,
...
- 1
0
votes
0
answers
54
views
Geth private POA network behaving strangely
The Setup
I have setup a private POA network using geth (v1.10.14).
My network configurations are as following;
BlockTime: 1sec
Consensus: Clique
Number of Signers: 3
Number of Miners: 3
I have ...
- 141
2
votes
0
answers
334
views
Post-merge PoA private network with geth
Crossposting this from r/ethdev as I have the feeling I have a better chance for an answer here.
Hi, I have been playing around with ethereum private networks for a
couple months, deploying them in ...
- 21
2
votes
1
answer
114
views
Private POA Ethereum Gas Problem
I have setup a private POA Ethereum network for testing purpose. From this link: Is gas burned in a PoA network? it stated that the gas will be circulated in the network (i.e. fed back to the signer's ...
- 121
0
votes
1
answer
193
views
How to modify a Clef rule to approve Ethereum requests based on specific miner and IP address?
How can I modify my Clef rule to approve requests based on both a specific miner and a specific IP address in Ethereum?
Here is my current code, which approves requests from a specific miner:
function ...
- 121
1
vote
1
answer
1k
views
start geth with poa
to start geth with clique, i followed the geth docs example,
https://geth.ethereum.org/docs/fundamentals/private-network
to 'Initializing the Geth Database' Chapter
But it didn't work,
is there ...
- 25
0
votes
0
answers
107
views
Private blockchain on AWS stuck on Looking for peers
I am running 3 nodes private blockchain network on AWS with Clique(POA) consensus. One is bootnode and others are miner nodes.
Here is my blockchainpoa.json
{
"config": {
"chainId&...
- 101
0
votes
0
answers
101
views
Error at eth_estimateGas & eth_call geth local testnet
Here I am asking for help for my problem, namely to eth_call and eth_estimateGas. So I created LocalTestnet with the aim of making a Swap Testnet, but when I run it an error appears like the one I ...
0
votes
1
answer
68
views
Is it possible to connect 2 geth node using 2 VPS using Linux (Ubuntu)?
I've running my geth node in vps server using ubuntu, first node is mining now. Now I have a new VPS server which is the second vps. How can I connect the first node to the other VPS server? Or I just ...
- 111
1
vote
1
answer
1k
views
Clique POA Signed recently must wait for others
In poa private ethereum network I have 2 nodes i mentioned the 1st node as a validator in genesis file after sometimes I'm adding the second account as a validator or signer in geth console using ...
1
vote
0
answers
109
views
Geth node accounts balances and contracts reset to 0 after 30,000 Blocks in POA private network
This is my geth node script
geth --datadir /root/data/data/ --networkid 1567134 --bootnodes enode://...
- 111
4
votes
1
answer
1k
views
geth error - Fatal: Database has receipts with a legacy format
I'm following this tutorial for testing an ethereum private blockchain using 3 nodes.
Everything works fine but if I stop the nodes I can't restart them using the same command. Each node was running ...
- 43
0
votes
1
answer
521
views
how to setup up Gas Price POA network
I have setup POA Network with clique, 5 Node with Public RPC, everything working fine, but i would like to setup Gas Fee to 25 GWEI automatically Metamask pick this estimation, by Default POA has 1 ...
1
vote
2
answers
275
views
I can't figure out the reason for this error
There are no problems with the nodes.
but i keep getting this warning
What exactly is the reason for this?
err="signed recently, must wait for others"
- 15
0
votes
0
answers
43
views
How can I collect fee in every transaction in Ethereum private Blockchain
I'm going to deploy a new chain but can I collect fee from every transaction happen in this chain and the fee will be automatically credited in a account without creating any exchange to collect fee.
- 1
0
votes
1
answer
581
views
How can my geth listen to my domain,
i have setup my geth private node on my ubuntu server and sofar so good localhost running perfectly. and now i really want to use my domain http://rpc.example.com instead of http://localhost:8545. and ...
0
votes
0
answers
69
views
Open ports for sealers in POA
Should sealers have open TCP/UDP ports that allow other nodes to connect when running a clique blockchain?
Edit:
In other words: Is it mandatory for sealer nodes to accept incoming connections on the ...
- 101
1
vote
0
answers
150
views
go-ethereum clique stop mining after one block, each node
After a whole day trying, it's time to ask.
I have 14 nodes using go-ethereum that used to work just fine.
I generated 14 accounts, inserted them in signers and voters in the genesis file, created the ...
- 123
1
vote
0
answers
63
views
Geth(clique): Getting the total initial supply on a geth private network
Using ethers/web3 is it possible to get the total initial supply (which is predetermined on clique) so I can get a hold of the data and display it somewhere..
I know how to get the total supply of an ...
- 123
0
votes
1
answer
173
views
How much bandwidth is needed to synchronize Ethereum in fast sync mode?
I want to deploy an Ethereum client to become a full node. According to the hardware recommendation on the official website , I need CPU with 4 cores, 16GB of RAM, 500GB of SSD and 25MB/s of bandwidth....
- 33
2
votes
1
answer
171
views
How Ethereum 2.0 and sharding will apply to private Ethereum with PoA consensus (Clique)?
We're about to run the private Ethereum PoA chain based on Clique and thinking how would we support it for ages. Hence we're wondering:
Whether Ethereum 2.0 updates (London, etc) are even applicable ...
- 317
1
vote
0
answers
140
views
Storage space geth for private network?
Setup a private network with clique at 15 secs block creation. Started with 3 nodes. Then deployed a smart contract (ERC 721) and send two transactions. After about 2 days idling, and no transactions, ...
- 61
3
votes
1
answer
642
views
Does Geth Clique will get affected when difficulty increases to its maximum?
I have started own private network with clique consensus algorithm in GETH. Regardless of miners now sealer will do the job and I have period:5. Difficulty is set 0 initially but over time it is going ...
- 419
1
vote
0
answers
288
views
Calling smart contract on private Geth network using Esp32/arduino
I'm trying to call smart contract deployed on private geth blockchain. I couldn't find relevant library on ESP32/Arduino to interact with smart contract. What should I do?
- 683
1
vote
0
answers
179
views
How do I send transaction from a non-sealer node/account that can be validated by a validator?
Quick review of my system :
Every nodes are connected through geth, clique (so a proof of authority system)
I have a bootnode that isn't a sealer
I have one main_node that is a sealer
I have one ...
- 11
1
vote
1
answer
880
views
How to force geth to use ipv4 instead of ipv6
I'm trying to configure geth on Redhat7 and facing an issue while connecting nodes from the two servers.
There are three validator nodes on each machines and ports(30303, 30304, 30305) are allowed. ...
- 371
0
votes
1
answer
431
views
Private ethereum network geth admin.addPeer not working
I am trying to make a private ethereum network the only problem I am facing now is when I make multiple nodes on same pc they discover each other but when I tried to connect other pc on different ...
1
vote
0
answers
87
views
Private Ethereum PoA error: "out of memory"
I'm working with multi node setup on Ethereum private chain PoA. We have all three validator nodes.
blockchain
├── genesis.json
├── node1
│ ├── geth
│ ├── keystore
│ ├── ...
- 371
1
vote
1
answer
771
views
Geth v1.9.24 - POA - no sealing with period 0 - "Sealing paused, waiting for transactions"
I have a private clique network with geth v1.9.24. 1 sealer and 1 node. With period=0 there is no sealing happening, all transactions go to txpool as pending, and logs show "Sealing paused, ...
- 21
1
vote
0
answers
143
views
Geth-Clique PoA
In the PoA consensus algorithm Clique, when a sealer broadcasts a block for a given height of the blockchain, do the other sealers check the validity of the transactions inside the received sealed ...
- 385
0
votes
0
answers
79
views
Error: Contract not deployed after cloning private geth network from one server to another
Steps to reproduce:
Private geth network is running on server1.
Deploy contract using truffle and make a few transactions.
Stop geth n/w of server1 and copy its entire directory (accounts.txt,
boot....
1
vote
1
answer
877
views
Geth keeps changing coinbase / miner account and stops working. (POA Network)
I have set up a Geth POA network of 2 nodes on different cloud instances. Network was running good for 2 months but now suddenly it's getting connections from unknown peers and mining stops working.
...
- 43
1
vote
0
answers
308
views
Geth network stopped mining
On my POA network there are 5 nodes/miners but suddenly all nodes stopped mining and giving this in console
"INFO [09-05|08:50:16.267] Looking for peers peercount=4 tried=4 static=0".
We ...
2
votes
1
answer
856
views
Why my private chain starting Geth on Ethereum mainnet
My private ethereum showing log "starting Geth on Ethereum mainnet.."
here are the full logs
INFO [08-27|09:14:02.302] Starting Geth on Ethereum mainnet...
INFO [08-27|09:14:02.302] Bumping ...
- 371
0
votes
1
answer
689
views
How to create you own ethereum sidechain?
How can I create a geth-clique POA network as an Ethereum sidechain to mainnet or testnets. what is the simplest ways to do that? are there any frameworks that can be implemented easily
- 818
1
vote
1
answer
982
views
POA: Geth node (miner) automatically stops after 3-4 hours which results in primary node pausing and looking for peers
I have set up 2 Geth nodes with POA on different machines. After starting bootnode and starting Geth nodes, they sync well and starts mining alternately. If I manually stop a node, other node keeps ...
- 43
0
votes
1
answer
696
views
Invalid block XX: unknown ancestor while restoring the chain - private blockchain
I'm trying to restore blockchain using import a rlp file
geth import backup.rlp
It show an error
Is there any way to exclude the bad blocks while exporting the chain data?
Also, if the gcmode is ...
- 371
0
votes
1
answer
47
views
Scalability of private chain with 0 block time
What could be some issues in scalability if a block time of 0 is set to a private ethereum blockchain? If I set it to zero, blocks will only be added to the blockchain every time there's a single ...
- 187
1
vote
0
answers
36
views
Cannot query contract methods after upgrading to geth 1.9
We have been running a geth 1.8 based private PoA chain for a long time. We are trying to upgrade it to geth 1.9.
After changing the command line arguments to reflect the new API and remove ...
- 111
2
votes
0
answers
215
views
Geth Clique Block Period 1, Fork of Chain inconsistency
Geth Clique Block Period 1, Fork of Chain inconsistency
Hello,
In my private Clique network with 4 Nodes (A,B,C,D) I noticed a fork in the chain for block period 1.
I noticed that it happens some ...
- 21
0
votes
1
answer
198
views
Geth Providing error on its directory path
I have initilize my node1 with my genesis file which worked fine command is 'geth --datadir node1/ init genesis.json'. But with same geth when I try to run this command
geth --datadir node1/ --...
