0

In Rinkeby, I deploy the following contract on Remix (injectedweb3). I pay contract, it goes well, gives Contract address BUT

  1. on Mist contract is watchable (can find with address) + Etherscan Rinkeby contract address is shown. However, on Etherscan in token search it doesnt find by its name Tokka (example). Metamask also cant find the Token.

  2. I send eth after start of Crowdsale to the contract address, however, it brings this Txn error.

https://rinkeby.etherscan.io/tx/0x79fd5d6c540d7909dd99264466619030eb649bcc9e3f40ecb58f51387064983c

Note, I didnt enter any amount in the CappedCrowdsale contract. I entered timestamps, rate, address and hard cap in the Create section of RUN (not in the code).

Please copy paste code in your Remix to understand any errors properly.

pragma solidity ^0.4.17;

/**
 * @title ERC20Basic
 * @dev Simpler version of ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/179
 */
contract ERC20Basic {
  uint256 public totalSupply;
  function balanceOf(address who) public view returns (uint256);
  function transfer(address to, uint256 value) public returns (bool);
  event Transfer(address indexed from, address indexed to, uint256 value);
}

/**
 * @title SafeMath
 * @dev Math operations with safety checks that throw on error
 */
library SafeMath {
  function mul(uint256 a, uint256 b) internal pure returns (uint256) {
    if (a == 0) {
      return 0;
    }
    uint256 c = a * b;
    assert(c / a == b);
    return c;
  }

  function div(uint256 a, uint256 b) internal pure returns (uint256) {
    // assert(b > 0); // Solidity automatically throws when dividing by 0
    uint256 c = a / b;
    // assert(a == b * c + a % b); // There is no case in which this doesn't hold
    return c;
  }

  function sub(uint256 a, uint256 b) internal pure returns (uint256) {
    assert(b <= a);
    return a - b;
  }

  function add(uint256 a, uint256 b) internal pure returns (uint256) {
    uint256 c = a + b;
    assert(c >= a);
    return c;
  }
}

/**
 * @title Basic token
 * @dev Basic version of StandardToken, with no allowances.
 */
contract BasicToken is ERC20Basic {
  using SafeMath for uint256;

  mapping(address => uint256) balances;

  /**
  * @dev transfer token for a specified address
  * @param _to The address to transfer to.
  * @param _value The amount to be transferred.
  */
  function transfer(address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= balances[msg.sender]);

    // SafeMath.sub will throw if there is not enough balance.
    balances[msg.sender] = balances[msg.sender].sub(_value);
    balances[_to] = balances[_to].add(_value);
    Transfer(msg.sender, _to, _value);
    return true;
  }

  /**
  * @dev Gets the balance of the specified address.
  * @param _owner The address to query the the balance of.
  * @return An uint256 representing the amount owned by the passed address.
  */
  function balanceOf(address _owner) public view returns (uint256 balance) {
    return balances[_owner];
  }

}

/**
 * @title ERC20 interface
 * @dev see https://github.com/ethereum/EIPs/issues/20
 */
contract ERC20 is ERC20Basic {
  function allowance(address owner, address spender) public view returns (uint256);
  function transferFrom(address from, address to, uint256 value) public returns (bool);
  function approve(address spender, uint256 value) public returns (bool);
  event Approval(address indexed owner, address indexed spender, uint256 value);
}

contract StandardToken is ERC20, BasicToken {

  mapping (address => mapping (address => uint256)) internal allowed;


  /**
   * @dev Transfer tokens from one address to another
   * @param _from address The address which you want to send tokens from
   * @param _to address The address which you want to transfer to
   * @param _value uint256 the amount of tokens to be transferred
   */
  function transferFrom(address _from, address _to, uint256 _value) public returns (bool) {
    require(_to != address(0));
    require(_value <= balances[_from]);
    require(_value <= allowed[_from][msg.sender]);

    balances[_from] = balances[_from].sub(_value);
    balances[_to] = balances[_to].add(_value);
    allowed[_from][msg.sender] = allowed[_from][msg.sender].sub(_value);
    Transfer(_from, _to, _value);
    return true;
  }

  /**
   * @dev Approve the passed address to spend the specified amount of tokens on behalf of msg.sender.
   *
   * Beware that changing an allowance with this method brings the risk that someone may use both the old
   * and the new allowance by unfortunate transaction ordering. One possible solution to mitigate this
   * race condition is to first reduce the spender's allowance to 0 and set the desired value afterwards:
   * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
   * @param _spender The address which will spend the funds.
   * @param _value The amount of tokens to be spent.
   */
  function approve(address _spender, uint256 _value) public returns (bool) {
    allowed[msg.sender][_spender] = _value;
    Approval(msg.sender, _spender, _value);
    return true;
  }

  /**
   * @dev Function to check the amount of tokens that an owner allowed to a spender.
   * @param _owner address The address which owns the funds.
   * @param _spender address The address which will spend the funds.
   * @return A uint256 specifying the amount of tokens still available for the spender.
   */
  function allowance(address _owner, address _spender) public view returns (uint256) {
    return allowed[_owner][_spender];
  }

  /**
   * approve should be called when allowed[_spender] == 0. To increment
   * allowed value is better to use this function to avoid 2 calls (and wait until
   * the first transaction is mined)
   * From MonolithDAO Token.sol
   */
  function increaseApproval(address _spender, uint _addedValue) public returns (bool) {
    allowed[msg.sender][_spender] = allowed[msg.sender][_spender].add(_addedValue);
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

  function decreaseApproval(address _spender, uint _subtractedValue) public returns (bool) {
    uint oldValue = allowed[msg.sender][_spender];
    if (_subtractedValue > oldValue) {
      allowed[msg.sender][_spender] = 0;
    } else {
      allowed[msg.sender][_spender] = oldValue.sub(_subtractedValue);
    }
    Approval(msg.sender, _spender, allowed[msg.sender][_spender]);
    return true;
  }

}


contract TOKKA is StandardToken {
    string public name = "TOKKA";
    string public symbol = "TOK";
    uint256 public decimals = 18;

    uint256 constant INITIAL_SUPPLY = 18000000 * 10**18;
    function StandardToken() public {
       balances[msg.sender] = INITIAL_SUPPLY;

    }
}

/**
 * @title Crowdsale
 * @dev Crowdsale is a base contract for managing a token crowdsale.
 * Crowdsales have a start and end timestamps, where investors can make
 * token purchases and the crowdsale will assign them tokens based
 * on a token per ETH rate. Funds collected are forwarded to a wallet
 * as they arrive.
 */

contract Crowdsale {
  using SafeMath for uint256;

   // The token being sold
  StandardToken public token;

  // start and end timestamps where investments are allowed (both inclusive)
  uint256 public startTime;
  uint256 public endTime;

  // address where funds are collected
  address public wallet;

  // how many token units a buyer gets per wei
  uint256 public rate;

  // amount of raised money in wei
  uint256 public weiRaised;

  /**
   * event for token purchase logging
   * @param purchaser who paid for the tokens
   * @param beneficiary who got the tokens
   * @param value weis paid for purchase
   * @param amount amount of tokens purchased
   */
  event TokenPurchase(address indexed purchaser, address indexed beneficiary, uint256 value, uint256 amount);


  function Crowdsale(uint256 _startTime, uint256 _endTime, uint256 _rate, address _wallet) public {
    require(_startTime >= now);
    require(_endTime >= _startTime);
    require(_rate > 0);
    require(_wallet != address(0));

    startTime = _startTime;
    endTime = _endTime;
    rate = _rate;
    wallet = _wallet;
  }

// creates the token to be sold.
// override this method to have crowdsale of a specific mintable token.
function createTokenContract() internal returns (StandardToken) {
    return new TOKKA();
  }


  // fallback function can be used to buy tokens
  function () external payable {
    buyTokens(msg.sender);
  }

  // low level token purchase function
function buyTokens(address beneficiary) public payable {
    require(beneficiary != address(0));
    require(validPurchase());

    uint256 weiAmount = msg.value;

    // calculate token amount to be created
    uint256 tokens = weiAmount.mul(rate);

    // update state
    weiRaised = weiRaised.add(weiAmount);

    // transfer tokens purchased 
    ERC20(token).transfer(this, tokens);

    TokenPurchase(msg.sender, beneficiary, weiAmount, tokens);

    forwardFunds();
}


  function forwardFunds() internal {
    wallet.transfer(msg.value);
  }


  function validPurchase() internal view returns (bool) {
    bool withinPeriod = now >= startTime && now <= endTime;
    bool nonZeroPurchase = msg.value != 0;
    return withinPeriod && nonZeroPurchase;
  }


  function hasEnded() public view returns (bool) {
    return now > endTime;
  }

}

contract CappedCrowdsale is Crowdsale {
  using SafeMath for uint256;

  uint256 public cap;

  function CappedCrowdsale(uint256 _cap) public {
    require(_cap > 0);
    cap = _cap;
  }


  function validPurchase() internal view returns (bool) {
    bool withinCap = weiRaised.add(msg.value) <= cap;
    return super.validPurchase() && withinCap;
  }


  function hasEnded() public view returns (bool) {
    bool capReached = weiRaised >= cap;
    return super.hasEnded() || capReached;
  }

}
2
function createTokenContract() internal returns (StandardToken) {
    return new TOKKA();
  }

The function above, which instantiates / deploys the token (TOKKA) contract is not being called anywhere. You'd want to add that to the crowdsale constructor so it generates the token contract when the crowdsale is deployed.

function Crowdsale(uint256 _startTime, uint256 _endTime, uint256 _rate, address _wallet) public {
    require(_startTime >= now);
    require(_endTime >= _startTime);
    require(_rate > 0);
    require(_wallet != address(0));

    startTime = _startTime;
    endTime = _endTime;
    rate = _rate;
    wallet = _wallet;
    token = createTokenContract(); // <--- Add this here

  }

Also, in the Crowdsale variables it should be:

 // The token being sold
  TOKKA public token; // not StandardToken, you want an instance of TOKKA

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.