Questions tagged [rinkeby]
Question related to the Rinkeby Test Network
0
votes
1answer
33 views
Sending a transaction without using MetaMask
I have designed a contract deployed on the Rinkeby with web3. I have also implemented a react app to interact with the blockchain.
I want to use my application without metamask but I got this error ...
0
votes
1answer
45 views
geth never completes syncing for rinkeby
My aim is to synchronise a full node for the Rinkeby network.
It seems that geth does not finish synchronisation. I have had it run for over three days, but it is stuck at the last few blocks.
> ...
0
votes
0answers
12 views
Testing a Smart Contract on two different devices at the same time
So the goal is to have two computers each owning one account or just different addresses on MetaMask for example and connecting them to the same Smart Contract that is deployed on Rinkeby.
Now how ...
1
vote
1answer
33 views
ERC20 token balance is always zero
I'm writing a pre-minted ERC20 token contract derived from openzeppelin-solidity like:
pragma solidity >=0.4.24;
import "../node_modules/openzeppelin-solidity/contracts/token/ERC20/ERC20.sol";
...
0
votes
1answer
32 views
Truffle migrations - UNABLE TO MIGRATE (Error: Deployment Failed)
The compilations goes well on the Rinkeby testnet using the command
geth --rinkeby --rpc --rpcapi="personal,eth,network,web3,net" --ipcpath "~/Library/Ethereum/geth.ipc" --syncmode light --cache 64 --...
0
votes
1answer
56 views
Not able to connect metamask account with remix
Error: -
Cannot get account list: Error: The method personal_listAccounts does not exist/is not available.
Pop containing above message appears again and again.
Privacy Mode in metamask is disabled....
0
votes
1answer
21 views
Why does Ropsten consume more Gas than Rinkeby?
I deployed the following smart contract both to Rinkeby and to Ropsten.
pragma solidity ^0.5.8;
contract storeHash{
string private vehicleData;
function setVehicleData(...
0
votes
1answer
27 views
Unable to Deploy Smart-contract to Ropsten from Truffle using Infura
I want to deploy my smart-contract on ropsten or rinkeby network from Truffle using Infura API, but face difficulty in deploying on any network.
I am using windows and my contract works well on ...
0
votes
0answers
30 views
Gas Limit exeeded (-3200 error) - verifier and Zokrates with Rinkeby
Gas estimation errored with the following message (see below). The
transaction execution will likely fail. Do you want to force sending?
gas required exceeds allowance (6995524) or always failing ...
0
votes
0answers
72 views
How to connect my light node to my full node?
I hosted a full node on AWS that syncs the Rinkeby testnet.
I have a Raspberry Pi as an IoT sensor running a light node. Unfortunately Rinkeby has the issue of very few full nodes that serve light ...
1
vote
0answers
19 views
Contract deployment error using rinkeby/infura. Error encountered, bailing. Network state unknown. Review successful transactions manually
I try to deploy smart contracts using Infura to the rinkeby test network and got this error:
Running migration: 1_initial_migration.js
Deploying Migrations...
... ...
1
vote
0answers
33 views
rinkeby faucet unsupported service error
I pasted the url of the facebook post and when I selected the amount of ether then this message is shown.
0
votes
0answers
37 views
Transaction to Smart Contract runs out of gas on Ropsten but not on Rinkeby
the following execution of my smart contract function runs out of Gas on the Ropsten network, but works fine on Rinkeby, do you have an idea why this happens?
struct vehicleData{
string ...
0
votes
0answers
35 views
Online Solidity Decompiler “Remove the constructor prefix” error message
I am trying to decompile a contract that I deployed previously on the Rinkeby test network, using the Online Solidity Decompiler at the following link: https://ethervm.io/decompile?address=...
0
votes
2answers
28 views
Is it possible to use MetaMask for a private consortium on Ethereum?
Assuming we create a private consortium chain over Ethereum and we want to use MetaMask for storing the keys and signing transactions to send the tokens belonging to this private consortium. ...
2
votes
0answers
25 views
Truffle exec ETIMEDOUT
I'm running a batch script that would create up to hundreds of concurrent transactions and wait for their completion
truffle exec scripts/....js --network rinkeby ...
everything works but after ...
0
votes
1answer
17 views
my smart contract always return empty when testing with rinkerby network
I am trying to implement the simple storage.
When calling set function, the contract will append a new Log object to logs array, and also return the related index to the caller for reference data.
...
0
votes
1answer
35 views
How to sync to Rinkeby Test Network using geth in Windows?
Should I run this command or the ipcpath must be changed for Windows.
geth --rinkeby --rpc --rpcapi="personal,eth,network,web3,net" --ipcpath "~/Library/Ethereum/geth.ipc"
And after that what path ...
0
votes
0answers
32 views
Function works on ethfiddle but reverts in mist
I've had this occur a few times, where I create a smart contract and one of the functions works in ethfiddle but reverts in Mist. I realized that in the Mist wallet, when I run the functions that fail,...
1
vote
2answers
60 views
Smart Contract Working on Remix but not TestNet
This question has been asked before. however, those answers did not help me. (of course, I now can't find the "answer" atm) It said that Ropsten (what I was currently using) has fewer miners - or ...
2
votes
2answers
92 views
Too low nonce error with web3j and rinkeby
All of sudden my application on testnet has stopped working due to low nonce error. No change in source code. My app connects to the network via infura. Any ideas what could be wrong here.
java.lang....
1
vote
0answers
285 views
web3.eth.getAccounts() : Cannot read property 'map' of undefined
const HDWalletProvider = require('truffle-hdwallet-provider');
const Web3 = require('web3');
const provider = new HDWalletProvider( 'passphrase', 'rinkeby.infura.io/v3/mytoken' );
const web3 = new ...
0
votes
0answers
100 views
unable to deploy contract on rinkeby network
I am trying to deploy my contract to rinkeby test network but unable to do so here is my contract code.
pragma solidity ^0.4.17;
contract Inbox {
string public message;
function Inbox(string ...
1
vote
0answers
85 views
How to interact with my Rinkeby contract via truffle console?
I've been using truffle console to interact with a contract which I developed locally with Ganache. I'd like to be able to call the contract's methods using the console once deployed to the Rinkeby ...
0
votes
1answer
58 views
how to find if a Tx hash is in pending state in ethereum mainnet after web3j fastTxMgr timeout
I am using QueuingTransactionReceiptProcessor() with callback accept(). DEFAULT_POLLING_ATTEMPTS_PER_TX_HASH is 10 and POLLING_FREQUENCY is 15000. That gives nearly 3 min wait for network to ...
1
vote
1answer
157 views
Run geth in light mode on Rinkeby and Raspberry
I am trying to run geth --light --cache 64 --rinkeby but it stucks on
INFO [02-12|08:58:16] IPC endpoint opened: /home/pi/.ethereum/rinkeby/geth.ipc.
I am using geth on a Raspberry.
The full output ...
1
vote
0answers
99 views
What is contex_canceled error in Geth?
I'm trying to run a public method in my smart contract in rinkeby network. But it fails with following error in Geth,
INFO [02-06|06:01:19.593] Served eth_call conn=172.17.42.1:23241 reqid=1 t=320....
1
vote
2answers
127 views
Solidity public variable getter call doesn't return
I have deployed a very basic solidity contract (pragma solidity^0.4.0) to Rinkeby. When I call the getters on my state variables, nothing is returned and I do not understand why. To compile the ...
1
vote
1answer
82 views
On Rinkeby, after I deploy my gas limit is low for function, even though it was high when I deployed
I deployed my smart contracts to Rinkeby. I made my gas limit 3000000 in truffle.js like so:
rinkeby: {
host: "localhost",
port: 8545,
network_id: 4,
gas: 3000000
}
On Etherscan, it shows my ...
0
votes
1answer
73 views
Unable to input address[] parameter in remix
I need help for deploy below smart contract on remix IDE. I have facing a problem as I need to input to 'setgrantaddress' as address[], How to input data in it?
There is two file name owned.sol and ...
0
votes
1answer
46 views
Stress test DApps on rinkeby test network
Is there any way of stress testing a dapp?
I developed dapp, now I want to see how much stress it can handle?
I can't test it on Main Ethereum Network. At least I can do it on Rinkeby test Network. ...
0
votes
0answers
30 views
Estimate Gas Error when deploy smart contract on Rinkeby
When deploy the smart contract to rinkeby i got this error
But the same code deployment run successfully on Main net and Ropsten. Any idea how this happen?
0
votes
1answer
40 views
What is the beginning nonce on the Rinkeby Testnet?
I know that the nonce is representative of how many transfers an account has made and is 0 at the start on the mainnet. However, on testnets, such as the now decommissioned Morden where it was 2^20 I ...
0
votes
1answer
161 views
Is there a way to set specific account when using truffle console rinkeby?
When I tested on ganache-cli at local, I could test on 'truffle console development' with some accounts which ganache-cli gave. But at rinkeby, I can't use function_name(argumets, {from: specific ...
2
votes
0answers
69 views
geth : Unable to fully sync to Rinkeby
I am trying to synchronise geth with Rinkeby node but when around 100 or so block left, it keep on dropping the peer and doesnot sync fully with the test net below are the screenshot for the same.
0
votes
2answers
125 views
Gas issue on sendRawTransaction on the rinkeby network
I'm facing a gas issue on rinkeby network on sendRawTransaction.
Tested with various gas value to experiment and getting either
insufficient funds for gas * price + value
or
exceeds block gas limit.
...
1
vote
1answer
31 views
Event firing before data is actually set [Testnet]
Today I've faced the behavior similiar to this post.
Event firing before data is actually set
I'm getting events using infura and then checking for the state. I expect to read updated blockchain ...
0
votes
1answer
79 views
Any option to get larger amount (i.e. 2000) of Rinkeby Ether?
We are planning to open our product to the public for live testing. We want to support both Ropsten and Rinkeby networks, just in case.
When registering, each user should get around 10 ether on ...
0
votes
1answer
67 views
Why does “truffle migrate” to Rinkeby results two transactions per contract
I ran truffle migrate -f 2 --network rinkeby. Then, I navigated to https://rinkeby.etherscan.io/address/[ADDRESS_OF_DEPLOYER]
And I got two TXs:
The second TX is clear since To equals to "Contract ...
1
vote
1answer
121 views
Can not deploy to Rinkeby via truffle - cannot read property 'bind'
I am using truffle: "^4.1.14" and ganache-cli version "^6.1.8".
When I try to migrate to ganache cli network, it works without a problem.
But when I try to migrate to Rinkeby, it always fails.
The ...
0
votes
1answer
60 views
How to limit latest block in Geth
I need some test Ethereum blockchains for development purposes. I need only part of blocks synced for example, blochain synced from 0 to 10'000`th block, because for example Rinkeby synced in archive/...
0
votes
1answer
280 views
How long does it take to sync Rinkeby network with geth?
I am syncing the Rinkeby network with geth
geth --rinkeby --rpc --rpcapi="personal,eth,network,web3,net" --ipcpath="~/.ethereum/geth.ipc"
When I run
eth syncing
in geth console, it is showing
{
...
0
votes
1answer
443 views
web3 not connecting to Infura / Rinkeby Testnet
I've successfully deployed my Smart-Contract to the Rinkeby TestNet via Remix.
Everything works perfectly from within Remix.
But when I try to get my web DApp to fire methods in my Smart-Contract - ...
1
vote
1answer
60 views
List of Token Exchanges Available on Testing Network?
Found Kyber Network Token Exchange on Ropsten so far.
Please share if you know more token exchanges available on any testing network for trading Tokens as a test.
3
votes
2answers
131 views
Transaction ordering in proof of authority
In decentralized computation the order of transactions is a big deal. For many smart contracts, the sooner a transaction is called, the bigger benefits for that transaction.
In proof of work, ...
1
vote
0answers
60 views
What happens if a Rinkeby node makes a bad block?
On the geth Rinkeby testnet, how does the rest of the testnet respond if a Rinkeby node makes a bad block, or a block that contains:
No transactions
Transactions that may have been included in a ...
0
votes
1answer
47 views
Deploying using Rinkeby understanding
Deploy we are using truffle
truffle migrate --reset --compile-all --network rinkeby
when i am deploying i will be getting build folder in my project directory while deploying through the ...
1
vote
1answer
193 views
How to integrate rinkeby test network with centralised server?
I am new to ethereum blockchain. I want to create ICO platform based website. I have created smart contract and deployed on rinkeby test network. I used python web3.py library to integrate python with ...
6
votes
3answers
7k views
Smart Contract Error: Returned values aren't valid, did it run Out of Gas?
Deployed a contract using Remix IDE to Rinkeby testnet.
Etherscan contract address and code is here.
contract SimpleCounter {
int counter;
constructor() public {
counter = 0;
}
...
1
vote
0answers
63 views
Triggering contract fallback function by sending ether from another contract
contract A {
uint public u;
event abc(address);
constructor() payable{
u=100;
}
function () payable{
emit abc(msg.sender);
u = 25;
}
function setu(uint i) {
u = i;
}
function ...
