Episode #125 of the Stack Overflow podcast is here. We talk Tilde Club and mechanical keyboards. Listen now

Questions tagged [parity]

Parity is an Ethereum client, written from the ground-up for correctness-verifiability, modularization, low-footprint, and high-performance. To this end, it utilizes the Rust language, a hybrid imperative/object-orientated/functional language with an emphasis on efficiency.

Filter by
Sorted by
Tagged with
0
votes
0answers
26 views

Parity Aura - Error: Transaction has been reverted by the EVM

I run the following code against two private blockchains, parity-aura and geth-clique. Why does the parity transaction revert and why does it use 6,000,000gas when it should actually only use about ...
0
votes
0answers
36 views

erc20 transfer SafeMath: subtraction overflow?

I am trying to transfer a erc20 token. const data = contract.methods.transfer(recipient, amount).encodeABI(); const rawTx = { from: sender, nonce: '0x' + count.toString(16), ...
0
votes
1answer
17 views

Parity proof of authority aura, how to detect misbehaviour?

I'm having trouble finding the answer looking at the Parity POA aura examples, the documentation on Parity Validator Sets, plus the Kovan validator set contract solidity source code. I see that you ...
0
votes
0answers
15 views

subscriptions in Geth or Parity

I am trying to get the way to register subscriptions to events, with the services of QuikNode I can do it without problem and it is working perfect, but I am trying to raise a node --light with geth ...
0
votes
0answers
14 views

Parity isn't doing anything- hasn't even started syncing as far as I can tell

I'm sorry for what must be a common question around these parts, but I'm getting nowhere fast with parity. I ran this command: parity --warp-barrier 8460000 --no-ancient-blocks And after 24 hours ...
0
votes
0answers
14 views

Is Geth and Parity a threat to decentralization?

They make up nearly 80% of all clients. If they wanted to, could they rearrange blocks and mess the blockchain up? Are they a threat of decentralization?
1
vote
0answers
14 views

Can we add block reward contract in parity aura latter on

We know there is an option to add a block reward contract to incentivize authors of new block by using blockRewardContractAddress at chain engine specs. Is it possible to add this property in the ...
1
vote
0answers
25 views

RPC command to list current nodes

I am using Parity and I want to see a list of the IP addresses of every node my node is talking to. I am sure I have done this before but I can't remember how. Please share the curl/RPC command to ...
0
votes
1answer
37 views

How to connect to Rinkeby without using Geth / Parity?

First let me explain my development environment. I am using Jupyter Notebook to play around with the Web3.py front-end code and Remix for the Solidity smart contract code. I am using the Metamask ...
3
votes
0answers
36 views

Process address deposit from contract

Our service handles thousands (currently 10000+) of users and each user has his own Ethereum deposit address. To detect a new deposit we: Scan each block to get a list of transactions Get a list of ...
2
votes
1answer
38 views

Good source for TPS and transaction latency / finality for private Ethereum blockchains

I am looking for a good source / sources to compare TPS and transaction latency (How long it takes to send a transaction until it is mined) for different private blockchain solutions. Especially I am ...
0
votes
1answer
17 views

Sending ETH or Tokens from the command line to be integrated in a PHP script

I'm relatively new to using ETH on the command line. Do I use Geth or Parity? All I want to do is be able to send some ETH or Tokens from my eth private key. Which way is the best way to do it? I plan ...
0
votes
0answers
31 views

Parity doesn't send a notification to ethminer

I can't get the ethminer to work with my private network. I start the parity in stratum mode, passing my own config file as a parameter, and then launch the ethminer. He successfully logs in and ...
0
votes
1answer
19 views

Set up hardforks parameters in parity JSON chain spec file for private network

I want to set up a private network for tests using parity, which will function in the same way as the current mainnet, but with very low block mining complexity. Is Is it true that for this I need to ...
1
vote
1answer
23 views

Implications of IP change on boot node?

I have a private blockchain using Parity. One of the bootnodes may have to change the IP. What is the correct way to do this and what are the implications of this? This question implies questions ...
2
votes
1answer
42 views

Congestion tx not found in mempool

I have a parity node running and am watching the txpool for incoming tx's to a specific address. I need to catch the tx in the mempool. The node is in France and the tx's are sent from Ireland. All is ...
1
vote
0answers
17 views

How I can get parity logs for non-mainchain blocks?

There's no much info on how parity event log works. What happens to event logs that correspond to block which is not mainchain anymore? Are they unrecoverably lost? For such an occasion, is there any ...
1
vote
0answers
20 views

It is very slow to sync by parity in archive mode

I am syncing by parity in archive mode. tracing="on" pruning="archive" fat_db="on" Currently it is around 4,880,000 blocks but very slow, 0.2~0.8 blk/s. I am afraid it will take serveral months ...
1
vote
1answer
34 views

Parity version while running

I'm running a Parity node in a docker container. I've installed it with docker pull parity/parity:stable some time ago. How can I know which version of Parity I'm running? (without stopping the node)....
1
vote
1answer
34 views

How can I export/show private key on parity cli?

I did this command on parity parity --chain mainnet account new I got the address but, How can I export or see the private key?
0
votes
0answers
22 views

Validator Contract deployment

Hello When I try to deploy below contract i get this error Open new block failed with error Error(Engine(FailedSystemCall("Engine error (Failed to make system call: Bad jump destination 0)")), ...
0
votes
1answer
30 views

How does Geth query the blockchain?

This question has probably been already answered somewhere else but I didn't find anything on the internet so I'm asking here. I wonder how clients such as Geth query the blockchain to get specific ...
0
votes
1answer
85 views

Parity POA Smart Contract Method Always Fails

I have set up a private POA Network according to the tutorial from the parity homepage. I have two nodes running on localhost:8540 and localhost:8541. I have connected MetaMask to my first node and am ...
0
votes
1answer
24 views

What is txpool equivalent in Parity?

I'm aware of txpool module in Geth where it able to show how many transactions in the pending and queue state. How to get the same result in Parity node? The parity_alltransactions looks like ...
0
votes
1answer
51 views

Deploy contract to Parity dev chain using Remix

I'm trying to deploy a contract via remix to my local development chain. However, the transaction never gets mined and is pending forever. When I use a node script it works (at least I receive the ...
0
votes
0answers
61 views

“Method not found” when trying to parity_subscribe to eth_getFilterChanges

Parity Ethereum version: 2.5.1-beta, tested on 2.4.6 as well Operating system: Linux (Ubuntu) Installation: binary Fully synchronized: yes Network: ethereum Restarted: yes I'm using a websocket. I ...
0
votes
0answers
45 views

Rinkeby ethereum block stuck at 4321234

I'm trying to sync rinkeby using parity with patch to support rinkenby but now it's stuck at block 4321234. Does anyone have solution to pass that block without having to resync from the beginning? ...
1
vote
1answer
67 views

How to access Parity node's mempool with web3.py?

I'm running a Parity node with parity --jsonrpc-api all, then connecting to it in python3 with w3 = web3.Web3(web3.HTTPProvider('http://localhost:8545')). I can call print(w3.eth.getBlock('latest'))...
0
votes
1answer
90 views

Parity Mnemonic or Keyfile not compatible with MEW?

I'm on a new computer and I have 2 ETH addresses I created on parity in december 2017 and february 2018. Now I thought I followed the plan on what to do to secure the addresses but when I enter the 12 ...
0
votes
0answers
17 views

Parity synced at not existing block 4839212

I have problem with parity, cant get synchronization in archive mode to end, anything, changing arguments, max-, min-, snapshot-peers, parity verisions do not help. I have blockchain in archive mode ...
0
votes
0answers
33 views

Parity build error

mac os 10.14.4 CMake-3.14.4 was installed by running the bootstrap script in CMake-3.14.4 directory. then ran $ git clone https://github.com/paritytech/parity-ethereum $ cd parity-ethereum $ ...
1
vote
1answer
61 views

Parity 2.2.7 doesn't recognize “registrar” or “eip150Transition” in the genesis file

I am trying to run a Parity client and sync it with a Geth private blockchain. I was able to do it at first, but after adding "constantinopleBlock", "byzantiumBlock" and "petersburgBlock" to the ...
3
votes
1answer
107 views

What is the --force-sealing option in the parity for

Can someone please explain what the --force-sealing option is for? From the description I don't understand exactly what it's doing. I want to understand why it must be set if I want to get a pending ...
1
vote
1answer
27 views

Fetching block template from node

The most famous opensource pool uses eth_getBlockByNumber method with parameter "pending" to get block template and generate jobs from it. But now, in parity, I found that this parameter is deprecated ...
3
votes
0answers
121 views

parity initializing snapshot whole night

I have parity installed and synced. I went out of disk space. I moved the chain to bigger ssd. Then I started the parity service and let it run whole night. It did not finish. in log I can see ...
0
votes
0answers
20 views

Mirroring public Ethereum blockchain to a private chain

I am working on tokenised securities space. Our plan is to run tokenised securities on a public Ethereum blockchain. There is an operational risk that public blockchain becomes unavailable and ...
0
votes
0answers
23 views

How do I send 0.1 tokens from the Parity client to another address using a custom gas price and CLI only?

How do I send 0.1 tokens from the Parity client to another address using a custom gas price and CLI only? Hi, I want to send 0.1 tokens from my Parity client running on Ubuntu to another address. I ...
0
votes
0answers
29 views

Send ETH on Command Line with Parity

How do you send ETH on the command line with Parity? I am trying this on a node running Parity 2.4.5: curl -H "Content-Type: application/json" -X POST --data '{"jsonrpc":"2.0","method":"...
1
vote
0answers
63 views

Read data from parity .sst Files

I'm working on a c# application that reads the data from ethereum parity and parses it. As of present i managed to read the key value pairs from the files and convert them to hex. While looking at the ...
1
vote
0answers
106 views

Parity syncing in archive mode stuck at block 4839206

I am running Parity inside docker in pod in Kubernets on Google Cloud. The pod is using disk with 2700 GB for storing Ethereum blockchain, and currently disk has about 2100 GB free. Unfortunately for ...
2
votes
1answer
74 views

How long did a transaction spend in the mempool?

I'm trying to create some statistics on how long a transaction spends in the mempool before being included in a block, so I can reason about future gas prices. It would appear transactions in Ethereum ...
0
votes
1answer
224 views

Parity - Permission Denied, Cannot write version file

I am trying to run a Parity daemon. Here is my shell command: sudo parity --db-path . --port=20000 --ws-port=20001 --jsonrpc-port=20002 --jsonrpc-apis web3,parity,parity_accounts,personal,eth daemon ...
0
votes
0answers
47 views

parity_pendingTransactions method return empty with parity light mode on ropsten testnet

I use parity with light mode and RPC call parity_pendingTransactions always return empty result. I'm using ropsten testnet network. How can I fix this problem ? here the example curl --data '{"...
4
votes
2answers
117 views

is it possible to run pending transactions on local node to see the outcome?

I am looking for a way to execute current pending transactions on local node, to see their outcome and log events, without really mine it. it is some kind of pre-simulation, to see what is going to ...
0
votes
0answers
34 views

Syncing parity light client fast on an embedded device?

I have a embedded device which is quite low in specs about 512mb of ram and 1ghz arm processor. I have installed a cross-compiled light parity-2.4.0. Now the problem is that it takes a lot of time ...
0
votes
0answers
22 views

Is there a call like listsinceblock bitcoin in ethereum?

i would like to record all the incoming transactions to my private network which is having so many ethereum accounts.is there any call to log them like listsinceblock in bitcoin.?
0
votes
1answer
9 views

Adding Recent EIP's to Custom Blockchain

I have a custom blockchain running on Parity 2.3.8. My question is do the recent EIP additions (https://coinswitch.co/news/ethereum-hard-fork-jan-19-know-everything-about-3-upcoming-eth-hard-forks) ...
0
votes
0answers
39 views

Ethereum parity high IO - slow response for getBalance

We have a strange problem with parity after our smart contract addresses are increased. There is a scheduled process to check for the transaction records and we have web3j calls to getBalance/...
0
votes
1answer
62 views

Accounts not getting the balance right

I'm trying to get the balance of a set of accounts using Parity RPC and web3.eth.getBalance. The problem is that, some accounts are returning 0 even though they have balance. For instance: https://...
1
vote
0answers
38 views

How do newHeads and event subscriptions behave on past reorgs?

Based on the geth documentation, I understand that a subscription on both newHeads and logs will emit all new heads and events that come from a reorg. However, I couldn't find what the behaviour is ...