I've found standard Mist wallet contract code, thanks to another answer.
I am trying to verify this contract over and over using different compiler versions but verification fails. Can somebody point me what am I doing wrong?
Ethereum Stack Exchange is a question and answer site for users of Ethereum, the decentralized application platform and smart contract enabled blockchain. It only takes a minute to sign up.
Sign up to join this communityI've found standard Mist wallet contract code, thanks to another answer.
I am trying to verify this contract over and over using different compiler versions but verification fails. Can somebody point me what am I doing wrong?
Your comparison will never work.
The compiled code at 0x01861C6Dfab20bAe0FA4EE698912630697D78cE4 is way too small to represent the compiled wallet.sol source code.
Why do you think the contract code at the address 0x01861C6Dfab20bAe0FA4EE698912630697D78cE4
is the wallet.sol compiled code?
0x01861C6Dfab20bAe0FA4EE698912630697D78cE4
The contract code at 0x01861C6Dfab20bAe0FA4EE698912630697D78cE4 is:
0x3660008037602060003660003473273930d21e01ee25e4c219b63259d214872220a261235a5a03f21560015760206000f3
It is pretty small in comparison to the compiled code in the next section.
I've compiled the source code from Mist wallet contract code with the --optimize
flag and the size of the compiled code is:
user@Kumquat:~$ solc --optimize --bin-runtime wallet.sol | wc -c
12854
Without the --optimize
flag, the size of the code is:
user@Kumquat:~$ solc --optimize --bin-runtime wallet.sol | wc -c
19632
The size of the wallet.sol compiled code is consistent with the number of lines of source code in the wallet.sol file.
The contract you're looking at is a stub. If you look at the contract's code and select Switch to Opcodes View
, you can see it references another contract at 0x273930d21e01ee25e4c219b63259d214872220a2 with source code and abi published.
I just had the same issue. The contract code you linked above is outdated.
If you navigate to the repository of the meteor-dapp-wallet you will find the updated Wallet.sol:
//sol Wallet
// Multi-sig, daily-limited account proxy/wallet.
// @authors:
// Gav Wood <g@ethdev.com>
// inheritable "property" contract that enables methods to be protected by requiring the acquiescence of either a
// single, or, crucially, each of a number of, designated owners.
// usage:
// use modifiers onlyowner (just own owned) or onlymanyowners(hash), whereby the same hash must be provided by
// some number (specified in constructor) of the set of owners (specified in the constructor, modifiable) before the
// interior is executed.
contract multiowned {
// TYPES
// struct for the status of a pending operation.
struct PendingState {
uint yetNeeded;
uint ownersDone;
uint index;
}
// EVENTS
// this contract only has five types of events: it can accept a confirmation, in which case
// we record owner and operation (hash) alongside it.
event Confirmation(address owner, bytes32 operation);
event Revoke(address owner, bytes32 operation);
// some others are in the case of an owner changing.
event OwnerChanged(address oldOwner, address newOwner);
event OwnerAdded(address newOwner);
event OwnerRemoved(address oldOwner);
// the last one is emitted if the required signatures change
event RequirementChanged(uint newRequirement);
// MODIFIERS
// simple single-sig function modifier.
modifier onlyowner {
if (isOwner(msg.sender))
_
}
// multi-sig function modifier: the operation must have an intrinsic hash in order
// that later attempts can be realised as the same underlying operation and
// thus count as confirmations.
modifier onlymanyowners(bytes32 _operation) {
if (confirmAndCheck(_operation))
_
}
// METHODS
// constructor is given number of sigs required to do protected "onlymanyowners" transactions
// as well as the selection of addresses capable of confirming them.
function multiowned(address[] _owners, uint _required) {
m_numOwners = _owners.length + 1;
m_owners[1] = uint(msg.sender);
m_ownerIndex[uint(msg.sender)] = 1;
for (uint i = 0; i < _owners.length; ++i)
{
m_owners[2 + i] = uint(_owners[i]);
m_ownerIndex[uint(_owners[i])] = 2 + i;
}
m_required = _required;
}
// Revokes a prior confirmation of the given operation
function revoke(bytes32 _operation) external {
uint ownerIndex = m_ownerIndex[uint(msg.sender)];
// make sure they're an owner
if (ownerIndex == 0) return;
uint ownerIndexBit = 2**ownerIndex;
var pending = m_pending[_operation];
if (pending.ownersDone & ownerIndexBit > 0) {
pending.yetNeeded++;
pending.ownersDone -= ownerIndexBit;
Revoke(msg.sender, _operation);
}
}
// Replaces an owner `_from` with another `_to`.
function changeOwner(address _from, address _to) onlymanyowners(sha3(msg.data, block.number)) external {
if (isOwner(_to)) return;
uint ownerIndex = m_ownerIndex[uint(_from)];
if (ownerIndex == 0) return;
clearPending();
m_owners[ownerIndex] = uint(_to);
m_ownerIndex[uint(_from)] = 0;
m_ownerIndex[uint(_to)] = ownerIndex;
OwnerChanged(_from, _to);
}
function addOwner(address _owner) onlymanyowners(sha3(msg.data, block.number)) external {
if (isOwner(_owner)) return;
clearPending();
if (m_numOwners >= c_maxOwners)
reorganizeOwners();
if (m_numOwners >= c_maxOwners)
return;
m_numOwners++;
m_owners[m_numOwners] = uint(_owner);
m_ownerIndex[uint(_owner)] = m_numOwners;
OwnerAdded(_owner);
}
function removeOwner(address _owner) onlymanyowners(sha3(msg.data, block.number)) external {
uint ownerIndex = m_ownerIndex[uint(_owner)];
if (ownerIndex == 0) return;
if (m_required > m_numOwners - 1) return;
m_owners[ownerIndex] = 0;
m_ownerIndex[uint(_owner)] = 0;
clearPending();
reorganizeOwners(); //make sure m_numOwner is equal to the number of owners and always points to the optimal free slot
OwnerRemoved(_owner);
}
function changeRequirement(uint _newRequired) onlymanyowners(sha3(msg.data, block.number)) external {
if (_newRequired > m_numOwners) return;
m_required = _newRequired;
clearPending();
RequirementChanged(_newRequired);
}
function isOwner(address _addr) returns (bool) {
return m_ownerIndex[uint(_addr)] > 0;
}
function hasConfirmed(bytes32 _operation, address _owner) constant returns (bool) {
var pending = m_pending[_operation];
uint ownerIndex = m_ownerIndex[uint(_owner)];
// make sure they're an owner
if (ownerIndex == 0) return false;
// determine the bit to set for this owner.
uint ownerIndexBit = 2**ownerIndex;
if (pending.ownersDone & ownerIndexBit == 0) {
return false;
} else {
return true;
}
}
// INTERNAL METHODS
function confirmAndCheck(bytes32 _operation) internal returns (bool) {
// determine what index the present sender is:
uint ownerIndex = m_ownerIndex[uint(msg.sender)];
// make sure they're an owner
if (ownerIndex == 0) return;
var pending = m_pending[_operation];
// if we're not yet working on this operation, switch over and reset the confirmation status.
if (pending.yetNeeded == 0) {
// reset count of confirmations needed.
pending.yetNeeded = m_required;
// reset which owners have confirmed (none) - set our bitmap to 0.
pending.ownersDone = 0;
pending.index = m_pendingIndex.length++;
m_pendingIndex[pending.index] = _operation;
}
// determine the bit to set for this owner.
uint ownerIndexBit = 2**ownerIndex;
// make sure we (the message sender) haven't confirmed this operation previously.
if (pending.ownersDone & ownerIndexBit == 0) {
Confirmation(msg.sender, _operation);
// ok - check if count is enough to go ahead.
if (pending.yetNeeded <= 1) {
// enough confirmations: reset and run interior.
delete m_pendingIndex[m_pending[_operation].index];
delete m_pending[_operation];
return true;
}
else
{
// not enough: record that this owner in particular confirmed.
pending.yetNeeded--;
pending.ownersDone |= ownerIndexBit;
}
}
}
function reorganizeOwners() private returns (bool) {
uint free = 1;
while (free < m_numOwners)
{
while (free < m_numOwners && m_owners[free] != 0) free++;
while (m_numOwners > 1 && m_owners[m_numOwners] == 0) m_numOwners--;
if (free < m_numOwners && m_owners[m_numOwners] != 0 && m_owners[free] == 0)
{
m_owners[free] = m_owners[m_numOwners];
m_ownerIndex[m_owners[free]] = free;
m_owners[m_numOwners] = 0;
}
}
}
function clearPending() internal {
uint length = m_pendingIndex.length;
for (uint i = 0; i < length; ++i)
if (m_pendingIndex[i] != 0)
delete m_pending[m_pendingIndex[i]];
delete m_pendingIndex;
}
// FIELDS
// the number of owners that must confirm the same operation before it is run.
uint public m_required;
// pointer used to find a free slot in m_owners
uint public m_numOwners;
// list of owners
uint[256] m_owners;
uint constant c_maxOwners = 250;
// index on the list of owners to allow reverse lookup
mapping(uint => uint) m_ownerIndex;
// the ongoing operations.
mapping(bytes32 => PendingState) m_pending;
bytes32[] m_pendingIndex;
}
// inheritable "property" contract that enables methods to be protected by placing a linear limit (specifiable)
// on a particular resource per calendar day. is multiowned to allow the limit to be altered. resource that method
// uses is specified in the modifier.
contract daylimit is multiowned {
// MODIFIERS
// simple modifier for daily limit.
modifier limitedDaily(uint _value) {
if (underLimit(_value))
_
}
// METHODS
// constructor - stores initial daily limit and records the present day's index.
function daylimit(uint _limit) {
m_dailyLimit = _limit;
m_lastDay = today();
}
// (re)sets the daily limit. needs many of the owners to confirm. doesn't alter the amount already spent today.
function setDailyLimit(uint _newLimit) onlymanyowners(sha3(msg.data, block.number)) external {
m_dailyLimit = _newLimit;
}
// (re)sets the daily limit. needs many of the owners to confirm. doesn't alter the amount already spent today.
function resetSpentToday() onlymanyowners(sha3(msg.data, block.number)) external {
m_spentToday = 0;
}
// INTERNAL METHODS
// checks to see if there is at least `_value` left from the daily limit today. if there is, subtracts it and
// returns true. otherwise just returns false.
function underLimit(uint _value) internal onlyowner returns (bool) {
// reset the spend limit if we're on a different day to last time.
if (today() > m_lastDay) {
m_spentToday = 0;
m_lastDay = today();
}
// check to see if there's enough left - if so, subtract and return true.
if (m_spentToday + _value >= m_spentToday && m_spentToday + _value <= m_dailyLimit) {
m_spentToday += _value;
return true;
}
return false;
}
// determines today's index.
function today() private constant returns (uint) { return now / 1 days; }
// FIELDS
uint public m_dailyLimit;
uint public m_spentToday;
uint public m_lastDay;
}
// interface contract for multisig proxy contracts; see below for docs.
contract multisig {
// EVENTS
// logged events:
// Funds has arrived into the wallet (record how much).
event Deposit(address from, uint value);
// Single transaction going out of the wallet (record who signed for it, how much, and to whom it's going).
event SingleTransact(address owner, uint value, address to, bytes data);
// Multi-sig transaction going out of the wallet (record who signed for it last, the operation hash, how much, and to whom it's going).
event MultiTransact(address owner, bytes32 operation, uint value, address to, bytes data);
// Confirmation still needed for a transaction.
event ConfirmationNeeded(bytes32 operation, address initiator, uint value, address to, bytes data);
// FUNCTIONS
// TODO: document
function changeOwner(address _from, address _to) external;
function execute(address _to, uint _value, bytes _data) external returns (bytes32);
function confirm(bytes32 _h) returns (bool);
}
// usage:
// bytes32 h = Wallet(w).from(oneOwner).transact(to, value, data);
// Wallet(w).from(anotherOwner).confirm(h);
contract Wallet is multisig, multiowned, daylimit {
uint public version = 2;
// TYPES
// Transaction structure to remember details of transaction lest it need be saved for a later call.
struct Transaction {
address to;
uint value;
bytes data;
}
// METHODS
// constructor - just pass on the owner array to the multiowned and
// the limit to daylimit
function Wallet(address[] _owners, uint _required, uint _daylimit)
multiowned(_owners, _required) daylimit(_daylimit) {
}
// kills the contract sending everything to `_to`.
function kill(address _to) onlymanyowners(sha3(msg.data, block.number)) external {
suicide(_to);
}
// gets called when no other function matches
function() {
// just being sent some cash?
if (msg.value > 0)
Deposit(msg.sender, msg.value);
}
// Outside-visible transact entry point. Executes transacion immediately if below daily spend limit.
// If not, goes into multisig process. We provide a hash on return to allow the sender to provide
// shortcuts for the other confirmations (allowing them to avoid replicating the _to, _value
// and _data arguments). They still get the option of using them if they want, anyways.
function execute(address _to, uint _value, bytes _data) external onlyowner returns (bytes32 _r) {
// first, take the opportunity to check that we're under the daily limit.
if (underLimit(_value)) {
SingleTransact(msg.sender, _value, _to, _data);
// yes - just execute the call.
_to.call.value(_value)(_data);
return 0;
}
// determine our operation hash.
_r = sha3(msg.data, block.number);
if (!confirm(_r) && m_txs[_r].to == 0) {
m_txs[_r].to = _to;
m_txs[_r].value = _value;
m_txs[_r].data = _data;
ConfirmationNeeded(_r, msg.sender, _value, _to, _data);
}
}
// confirm a transaction through just the hash. we use the previous transactions map, m_txs, in order
// to determine the body of the transaction from the hash provided.
function confirm(bytes32 _h) onlymanyowners(_h) returns (bool) {
if (m_txs[_h].to != 0) {
m_txs[_h].to.call.value(m_txs[_h].value)(m_txs[_h].data);
MultiTransact(msg.sender, _h, m_txs[_h].value, m_txs[_h].to, m_txs[_h].data);
delete m_txs[_h];
return true;
}
}
// INTERNAL METHODS
function clearPending() internal {
uint length = m_pendingIndex.length;
for (uint i = 0; i < length; ++i)
delete m_txs[m_pendingIndex[i]];
super.clearPending();
}
// FIELDS
// pending transactions we have at present.
mapping (bytes32 => Transaction) m_txs;
}
Link to raw data. I just uploaded this source to live.ether.camp to confirm it working on my multisignature wallet. And it verified well.